A spiral cam, or a flat piece of metal of spirally curved outline, used for giving motion to, or changing the position of, another part, as the hammer tail of a striking clock.
A little dell or valley; a flat piece of low, moist ground.
Defn: A shoe for oxen, consisting of a flat piece of iron nailed to the hoof.
Defn: A flat piece of wood, used for striking, children, esp.
Defn: A flat piece of metal; especially, a disk of metal ready to be stamped as a coin.
The split horn is then heated by dry heat--an oven is best--then pressed between two cold plates to a flat piece.
Illustration: Detail of the Parts and How They are Assembled to Make the Clapper] A flat piece of steel spring, 1/2 in.
I have a flat piece of jade, apparently part of a thin hatchet, on one face of which two notches have been sawn converging at an angle of 135° and marking out what when detached and ground would have formed a curved ear-ring.
The combs are then placed in the bar, with a flat piece of brass called a countercomb, between each, to ascertain and preserve their distances from each other.
A flat piece of an alloy of lead and tin is interposed between the toothed surface and the anvil, while the other side is cut, which completely preserves the side already formed.
The loop is a flat piece of skin of the bearded seal, in which is cut a large oblong eye.
It is a flat piece of thick plank of some soft wood, 11.
This is then rubbed down with a flat piece of sandstone or gypsum, and finally with chalk, so that when finished it seems like pipeclayed leather.
A shoe for oxen, consisting of a flat piece of iron nailed to the hoof.
A flat piece of metal; especially, a disk of metal ready to be stamped as a coin.
A flat piece of wood, used for striking, children, esp.
This little stand is good for soldering any upright piece to a flat piece, when they should be at right angles to each other.
Many are made by using a bob punch, making a hollow depression in a flat piece, and a rounded or button head shape on the end of the upright.
When I want to work a flat piece of copper into a rough bowl shape, I hammer it into the depression.
The first diagram on page 57 shows a flat piece of leather cut into a circular form; the next shows it perforated and a lace put through the openings; the third indicates how by tightening the string a crown could be made to the hat.
It was circular in form, one piece of whalebone being bent into the proper shape for the sides and anotherflat piece of the same material sewed to it for a bottom, so closely as to make it perfectly watertight.
Between the masing and the itirbing is the hole (pa) of the kayak, the rim of which is formed by a flat piece of wood or whalebone bent into a hoop.
The iron edge is inserted into a flat piece of bone, which fits into the slit of a large head.
The above list will hopefully provide you with a few useful examples demonstrating the appropriate usage of "flat piece" in a variety of sentences. We hope that you will now be able to make sentences using this group of words.
