The boy stuck the soldering irons into the midst of the charcoal, which looked a pale rose color in the daylight.
At that moment Coupeau was soldering the extreme edge of the sheet close to the gutter; he slid down as far as possible, but without being able to reach the edge.
He imitated the bellows with his mouth, he moved the iron about in the fire and knelt down so as to pass his thumb along the edges of the mat, thinking that he was soldering it.
An imperfect soldering between two materials of different nature, cement and flint, may leave a breach wide enough to admit besiegers as thin as a hair.
The soldering is effected with a touch of silk in the middle of the bit and along a certain distance to the right and left, as far as the bending of the head permits.
Graham busied himself with the soldering iron and another headband.
He laid his soldering iron down and massaged the small of his back, grimacing slightly.
He looked very triumphant and happy, while father followed, carrying in a rather sheepish manner--what but the old soldering furnace!
He was tired of his occupation as a tin-peddler, and glad to get rid of the obnoxious soldering furnace, as well as the patty-pans and muffin-rings.
Among the articles which the tin-peddler had given him was a soldering furnace and irons, for mending old tinware.
Mr. Stillman opened the package with grateful anticipation, and found--the soldering furnace!
It was this very ill-luck-bringing soldering outfit that did it.
A small soldering "iron" (which is really copper) and wire solder are used.
A small bead of soldering paste is placed on each joint.
The operations are like those for the hat pin except that hard soldering is necessary.
Now place the copper, outside face down, on an asbestos pad, applying the soldering paste to the central portion, place the disk with its bit of solder on this portion of the copper, and fuse as before.
The belt plate should then be placed on the asbestos pad, with its convex face down, and blocked up so that the end where the soldering is to be done is horizontal.
The copper may be "tinned" by filing the point bright, heating it, dipping it in the soldering paste, and then quickly touching it to the solder wire.
Then he caught sight of the Chief, who had hastily picked up a cold soldering iron and was tentatively touching a random point on the new mechanism.
The Chief didn't look around, but bent closer to the soldering point.
We were watching Kenzie, who snapped the juice off his solderingiron and pointed the iron at Pringle.
You may reflect on this, Pringle," Kenzie stated and waved his soldering iron in the air.
The door closed behind them, and the Chief dropped the cold soldering iron with a sigh of relief.
Why, if the skeleton of each species was separately contrived, was this bony mass made by soldering together a number of vertebræ like those forming the rest of the column, instead of being made out of one single piece?
Before soldering the feet on, paint the joints already soldered with clay, wash and paint the opening where the heat is applied for soldering on the feet.
Do this on all four sides, and in a little while you'll find the solder has covered the end of the soldering iron.
Be careful to wash the joint made in the band with a little clay to prevent its melting during the soldering of the bezels.
This makes a tight joint: it is like solderingwrought iron together.
Manufactured fluid for soldering (used sometimes in place of muriatic acid).
The metal used here would be quite strong enough just to turn over in the pin without soldering it first to the body of the hinge piece.
Tool: Soldering iron (can be made out of a piece of half-inch round copper.
Illustration: Soldering iron] Place the end of the copper rod in the fire and heat it red-hot.
If the solderingis carefully done there will be little filing to do afterward.
If this soldering makes the bowl very soft stiffen it by hammering it lightly all over the surface.
The radiator is a complex affair and soldering it used to be a matter of skill.
Fitting and soldering these tubes in place is by hand a long operation, requiring both skill and patience.
If but one corner is prepared and soldered, the heat necessary for soldering causes the copper oxides to come to the surface at the other corners which must be removed before they can be soldered.
A piece of silver solder, a slate slab such as is ordinarily used for grinding ink, powdered or lump borax, and a soft hair brush of some sort are all that is necessary for the process of soldering in addition to what we already have.
In soldering the bottom, care must be taken not to unsolder the corner.
The soldering is protected by placing a paste made of yellow ochre and water about the soldered joint both inside and outside of the strip.
When soldering such small pieces the charcoal block is indispensable, for depressions are easily made in it where necessary.
Borax and solder are next applied and the solderingdone as described on page 63.
By making this piece 1/4 inch greater than the diameter of the bowl, the soldering process becomes much easier.
After the soldering is finished, the projecting edges may be filed off to the edge of the bowl.
Millie laid down her soldering iron, and disappeared through the bulkhead, returning shortly with a tray of sandwiches and coffee.
Among these may be cited works in which producer-gas is employed as a furnace fuel or as a soldering or roasting medium.
Water-gas is employed in soldering on account of its reducing properties and of the high temperature of its flame.
I believe I saw a little soldering outfit in the kit of tools.
They made a little fire close by, where the small soldering iron could be heated.
A suitable contact with such a pipe may be made by tapping one or two large bolts into it and then soldering the wires from lightning arresters into holes drilled in the heads of these bolts.
The crystals of octahedral borax fuse more easily than those of the prismatic form and are less liable to split when heated, so that they are preferable for soldering or fluxing.
Rotate iron in the mixture until the soldering edge of the iron has become bright or thoroughly covered with the solder.
If you do not care to bother with thesoldering you can purchase a safe and simple device that will do the work for you.
Soldering flux is a solution of zinc in crude muriatic acid.
The first embraces jointing effected with soldering mixtures into which copper, brass, or silver largely enter, the second those in which lead and tin are the only, or the principal, constituents.
But in brazing andsoldering the parts to be united are generally nearly cold, and only the soldering material is fused, so that the conditions are less favourable to the removal of oxide than in welding processes.
Aluminium enters into the composition of most of the solders for these metals, and the "soldering bit" is of pure nickel.
There is much similarity betweensoldering and welding in this respect.
This explains whysoldering materials are used in a large range of temperatures.
The soldering material is compelled to follow the areas prepared for it by the flux, and it will not adhere anywhere else.
Many are the variations that have been made on this self-soldering idea, and there has been much controversy as to its desirability.
Binding posts are provided on the extended portions of the terminals to assist in mounting the resistance on a supporting frame, and the posts terminate in soldering terminals by which the resistance is connected into the circuit.
A small local action takes place in the dry cell, caused by the dissimilar metals necessarily employed in soldering up the zinc cup and in soldering the terminal rod of zinc to the zinc cup proper.
In autogenous solderingthe two pieces are directly united by the partial fusion of their contiguous surfaces.
The old herder padded to his shack and squatted down, to finish soldering the tiny rings on the buttons for his daughter's jacket.
Then he plodded back to the shack and busied himself patiently soldering tiny rings on the silver pieces, that the set of buttons for his daughter's jacket might be complete.
Endless gradations of colour are obtained by laying or 'soldering on' successive thin layers of glass until the desired effect is obtained.
On the other hand, this open 'kick' would be admirably adapted to the introduction of a wick[116] if the vessel before the soldering on of the ring at the base had been used as a lamp.
The back of the shell is now moistened with soldering fluid and covered with a layer of tin-foil, which acts as a solder between the copper and the later backing of lead.
There, with the help of the kit of tools carried aboard, and a strip of tinned iron cut from a biscuit box, our hero effected a temporary repair to the water jacket, soldering the patch into position.
He could make a temporary repair inside half an hour, if given the opportunity, some sheet copper, and a soldering lamp.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "soldering" in a variety of sentences. We hope that you will now be able to make sentences using this word.
