In this passage, where you see deep holes, scraper and charcoal will be insufficient; the planer must, therefore, hammer them out before he goes at the other parts.
In a shop which does not have the advantage of a planer or shaper, there are so many articles which must be filed up, that it is interesting to know something of how the various articles are made with a file.
He has no shaper or planer for the purpose, so that it must be done by hand.
In a lathe the object turns upon centers against a tool; a planer carries its tool in a revolving cylinder, the work being fed in a straight line.
In many cases the milling machine ousts the planer as much more economical.
Page xvi: plainer changed to planer Page 43: opening quote mark added before was the great constructive .
With a planer or a shaper the size and uniformity of the work depend upon the skill of the operator.
The planer has led to the invention of a machine which dispenses with this skill.
In his judgment the milling tool, which can be speeded indefinitely, will encroach more and more on the planer, limited as the planer is by its movement being to and fro.
In a shop where only small work is to be done a planer may be dispensed with and a shaper used instead.
The proof planer is not the common method of taking proofs, but is employed in places where there is no regular proof press, and also under conditions where a proof press cannot readily be used.
When ink has been rolled on the type a sheet of thin paper, slightly damp, is laid on the type and the planer is used for taking the impression.
Proofs are sometimes taken by using a proof planerand mallet, but more commonly by means of a proof press.
Those with large open spaces and small lines, and those with delicate lines like scripts and kerned italic letters, should not be proved with a planer if another method is available.
If the planerdoes not cover the whole page, it must be lifted from one part to another until the whole surface is covered.
The mallet should hit straight, without glancing sidewise, and the planer should be held level and steady.
A planer proof must be made while the type is on the imposing stone or some other solid surface.
He then lifts his planer carefully and places it over the nearest unprinted surface and repeats the blow.
This proof-planer is a small thick block of wood, one side of which is perfectly flat and covered with thick cloth.
A planer was put upon the face of the types, to force them down in the composition until they were firmly secured at a uniform height.
That very day he found Arthur unconsciously and even patronizingly shirking the tending of a planer so that his teacher, Bud Rollins, had to do double work.
Arthur flushed, flashed, clenched his fists; but the planer was between him and Waugh, and that gave Waugh's tremendous shoulders and fists a chance to produce a subduing visual impression.
If the classifier finds the disclosed organization of dash-pots and planer or dash-pot and generator more than a conventional illustration of an obvious use, he should note a cross-reference to Planers or Electricity, Generation.
If the title had been Planers, Reciprocating beds, the indication would be that the subclass was a part subclass to receive planer beds only.
One of them seemed to be helpless in the grasp of the other, and staggering clear of the planer they went reeling through the mill.
He showed it by breaking up my planer in a fit of temper, and I fired him.
It is hardly necessary to plane the upper surfaces by hand, as the planer will leave them fairly smooth, though they will look a little nicer smoothed by hand.
If you have many joints to make, you can have the edges jointed at slight expense at any wood-working mill on a planer made for the purpose.
One way of doing the job is to transport the shaft under a drill that will cut a hole at each end of the slot area, and then to turn it over to the planer for the intermediate metal to be scraped out.
There we have an electric plate-planer scraping the surface of a sheet half the length of a cricket pitch.
There are hundreds of drill press hands who cannot operate a milling machine, lathe hands who know nothing of planer work, and so on.
In planing a piece to a given thickness, the gage may be set to that height with great accuracy by means of a micrometer caliper, and then the planeror shaper tool adjusted down to the gage.
This instrument may also come in very handy when setting tools on the planer or shaper.
Minna Planer was amiable and kind, but the frantic effort she made at times, in public, to be profound or chic must have touched the great man on the raw.
These front surfaces should be at a right angle to the length of the bed [V]-ways, and this may be tested by placing a straight-edge across their surfaces and testing it with a square rested against the edge of the planer table.
The construction of the chuck is solid, and the various adjustments may be quickly and readily made, giving to it a range of capacity and usefulness that are not possessed by the ordinary forms of planer chucks.
C (which are usually provided on the ends of planer beds) and delivers it through pipes passing up to the sides of the [V]s, thus affording a constant flow of oil.
S fitting the holes in the planer table and the tongue P being pivoted to the body R of the pawl.
The following, however, are the general rules applicable when considering the power required for the cutting of metal with lathe or planer tools.
The methods of fitting the guideways and guides of planerbeds and tables is given in the examples of erecting.
The term timber planer implies that plain knives only are used in the machine, which is therefore intended for producing plane surfaces.
We want more pay and freedom from Sunday work," said a big fellow, the Norwegian who ran the biggest planer in the shop.
When Robert stepped down from the planer and started towards the door, more than one black hand was thrust into his with the words, "God bless you, sir!
The remedy in the case of the planer is to rest the structure on the two housings at the rear end and on a pair of legs about one-fourth of the way back from the front, pivoted to the bed on a single bolt as near the top as possible.
There is a principle underlying the Sellers method of driving a planer table that may be utilized in many ways.
Mr. Sweet, which represented three forms of lathe and planer construction.
But in other machines built in the form of planing machines, in which the head is traversed while cutting, as is the case with the profiling machine, the planer head form is not right.
Figure up at even fifty pounds to the square inch of wearing surface what any planer ought to carry, and you will find that it is not from overloading.
Is it an uncommon thing to see the ways of a planer that has run any length of time cut?
The usual form of lathe and planer beds or frames is two side plates and a lot of cross girts; their duty is to guide the carriages or tables in straight lines and carry loads resisting bending and torsional strains.
It is closely associated with cypress, the planer tree, and other species which grow in deep swamps.
It was not until long after theplaner had been invented that Eli Whitney, the American genius of cotton-gin fame, conceived the milling machine.
It works upon soil with the same precision that a planer works upon a slab of cast iron.
When the planer was invented and it was possible to produce straight surfaces with a considerable degree of accuracy, all of Watt’s ingenious parallel motions, went into the discard and the cross-head and guides took their place.
The big engine was running slowly, which did not happen often, and Brooke, who leaned on the planer table, was thankful for the respite.
Since we've been here that planer has broke up two or three men.
I broke up the Kenawa planer in the Tomlinson mill.
The dust the planer threw off had also worked its way through them, and adhered in smeary patches to his dripping face, while his hair and eyebrows might have been rubbed with flour.
He was still sitting there when a dusty man in store clothes, with a lean, intent face, came along and glanced at the planer before he looked at him.
For other makes of high-speed steel used in lathe and planer tools the makers recommend that the tools be cut from the bar with a hack saw or else heated and cut with a chisel.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "planer" in a variety of sentences. We hope that you will now be able to make sentences using this word. Other words: buffer; lathe; plane; tool
