That is, the commutating pole insures sparkless commutation from no load to heavy overloads with a fixed brush position.
The second method is the less expensive of the two and protects against overloads as well as short circuits in the transformers, but it is less positive and introduces delay in the disconnection of the transformer when trouble occurs.
The fuses must be of a capacity to prevent overloadsunder running conditions.
There is, however, considerable torque developed, and the device for revolving the moving element must be liberally designed so as to withstand the excess torque caused by temporary overloads or short circuits.
Where the finer sizes are used, or where overloads are desirable, however, this ratio should preferably be 1 to 25 and a forced blast should be used.
The design of boiler must be such that there will be no priming or foaming at high overloads and that any added scale formation due to such overloads may be easily removed.
For ordinary stoker settings where there will be no excessive overloads required from the boiler or any hand-fired furnaces where the rates of driving will be high for such practice.
For stoker-fired furnaces where high overloads are to be expected or where other extreme conditions of service are apt to occur.
Repeated daily performances at overloads have demonstrated beyond a doubt the correctness of Mr. Babcock's computation regarding the circulating tube and header area required for most efficient circulation.
The accumulating of too great a quantity of knowledge at random, overloads the mind in stead of adorning it.
The accumulating too great a quantity of knowledge at random, overloadsthe mind instead of adorning it.
There is a liberal margin of field excitation to take care of overloads or for operation on loads of low power factor.
With moderateoverloads of a very temporary nature this dash-pot so retards the action of a tripping plunger that the circuit-breaker does not open.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "overloads" in a variety of sentences. We hope that you will now be able to make sentences using this word.
