The principal divisions of the scale have been obtained experimentally, and traced opposite the index when the calibrating points were exactly 7, 8, 9 etc.
The length of these hooks and the angle of the wedge are such that the distance apart of the rounded backs of the directing strips is everywhere less, by about one-thirtieth, than that of the calibrating buttons.
These buttons are given a thickness such that when the edges of their heads are in contact, the external diameter of the tube exceeds the distance apart of the two calibrating points by more than one millimeter.
Walking swiftly along a passageway he passed Hodak at a workbenchcalibrating instruments as cover.
The master pyrometer, after calibrating against the melting points of various substances, will have a calibration chart which should be used in the checking operation.
If the standard calibrating instrument used contains a dry battery, it should be examined from time to time to be sure it is in good condition.
The most symmetrical method ofcalibrating a section, called by C.
To save the labour and difficulty of calibrating with shorter threads, the corrections at intermediate points are usually calculated by a formula of interpolation.
With this object a scale is ruled on the machine, and the errors of the uncorrected screw are determined by calibrating the scale.
By means of the three-way switch C the battery current may be sent either into the primary of E, for the purpose of calibrating the galvanometer, or into the magnetizing coil of the ring under test.
For calibrating the thermometers, an ordinary wooden water-pail is provided with several holes in the side near the bottom.
Where Thermometers are Required Equally important with the foregoing is the necessity of calibrating and testing of all thermometers used during a test.
It consists of an air vacuum dash pot with a graphite piston, the dash pot being fastened to the stationarycalibrating ring of the trip coil and the moving outside cylinder is fastened to the armature of the circuit breaker.
Each relay has five calibrating points, the lowest being the normal full load current of the motor, the highest 300 per cent.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "calibrating" in a variety of sentences. We hope that you will now be able to make sentences using this word.