These tillers are operated by straight rods connected to the pistons of horizontal hydraulic cylinders of 5 inches diameter, which are attached to the sides of the keel.
The former is propelled by a three-bladed screw, 5 feet 6 inches diameter and 5 feet pitch; and the latter by a two-bladed screw of similar proportions.
Paste is most economically made in a zinc pot, which may be 4 inches deep, and 3-1/2 inches diameter.
It may be a cylinder, 5 inches long, and 3 inches diameter, with a handle about 5 inches long, and 1 inch diameter.
The cylinders of this engine are each 14 inches diameter; the length of the stroke of the piston is 21 inches.
The gaff is of spruce, 61 feet long and 9 inches diameter.
Vertical wheels are made from ten inches to three feet diameter, and the size of the cases must differ accordingly; four-ounce cases will do for wheels of 14 or 16 inches diameter, which is the proportion generally used.
The boiler is 4 feet diameter, the cylinder 7 inches diameter, 3-feet stroke.
The present form of the jet completely obviates this difficulty, as the end of the branch is always 1-1/2 inches diameter.
This air may afterwards pass off through a hole of 2-1/2 inches diameter in the uppermost cover, in which a funnel is placed for the supply of liquor as it is wanted to keep up the percolation.
Thus, how many teeth in a wheel 36 inches diameter and of 3 diametral pitch?
If he will make a model of one of 20 inches diameter at least, I will give him my advice and as much assistance as I can.
The two engines at Wheal Rose and Wheal Busy, near Chacewater, of 66 and 72 inches diameter, consumed each about thirteen tons of coal daily.
The lid is in shape like an ancient bed tester; that is to say, its four corners rise into a sharp angle, and come to support a circle 16 inches diameter, bearing a vertical collar of about two inches.
Mine have a bottom of about 18 inches diameter; they are two feet high, have a bulge of 6 inches near the top, and then draw in to form an overture of about 8 inches.
The connecting rod is 28 feet long center to center, and 12 inches diameter at the middle.
The air pump, which is 36 inches diameter and 2 feet 6 inches stroke, is a vertical pump worked by wrought iron plate levers and two side links, shown by dotted lines, from the main crosshead.
The crankshaft is made of forged Bolton steel, and is 21 inches diameter at the part where the fly-wheel is carried.
The above list will hopefully provide you with a few useful examples demonstrating the appropriate usage of "inches diameter" in a variety of sentences. We hope that you will now be able to make sentences using this group of words.