Then comes injectors, lubricatorshave third place, and so on down the list.
Something About Sight-Feed Lubricators 132 Two Ways of Reading .
Lubricators of large volume or lubricators which can be readily filled without stopping the engine should be employed.
After the ignition apparatus and the lubricators have been thus inspected, the engine is adjusted with the piston at the starting position, which is generally indicated by a mark on the cam-shaft.
In order that pressure-lubricators may operate perfectly they should be regularly inspected and the check-valves ground from time to time.
Glass, sight-feed lubricators with stop-cocks, are very often used on crank-shafts.
The cotton waste of the lubricators should be properly immersed, and the drip lubricators examined to determine whether they are supplying their normal quantity of oil.
It is advisable to add a little salt to the water contained in sight-feed lubricators so that the drop of oil is easily freed.
The steam cylinders and the high-pressure air cylinders were fed with oil from hand-fed automatic lubricators made by the Detroit Lubrication Company, Detroit, Mich.
The air cylinder and steam cylinder lubricators were of the same kind, except that no condensers were necessary.
A little "Tinol" is smeared over the surfaces to be joined, and the lubricators are placed in position and heated with the blow-lamp until the solder runs.
To prevent the oil flowing too freely, the lubricators should be provided with airtight wooden plugs.
Meanwhile he had found the gasolene tap and turned it, while the fingers of his other hand as rapidly lifted the six lubricators which fed the engine with that fluid so vital to her.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "lubricators" in a variety of sentences. We hope that you will now be able to make sentences using this word.
