In such cases, the first super is always to remain the upper one, for it would be useless to put the triplet anywhere except between the two now in use, and it must have a two-inch hole in its crown as a passage upwards for the bees.
On the top a two- or three-inch hole may be cut in the centre, for the purposes of supering, of feeding, or ventilation.
A quarter-inch hole should be bored in the top of the truck-bed at G and H (Fig.
The Wheel Shaft= should be a trifle shorter than the inside width of the can, and enough smaller than the 1/4-inch hole in the wheel side pieces so the wheel will turn freely.
Cut out the openings with a sharp knife and then do the rest of the cutting with a pair of scissors; punch a 1/4-inch hole in each end of each car with a lead-pencil (Fig.
This was made the same shape as the cam, but the 1/4 inch hole drilled in one end was left round, while the other was cut square as in the cam.
This was accomplished, after spoiling one, by drilling a quarter of an inch holein the square and cutting the opening square with the point of the knife.
The two sides of the ocean were held together and the 1/4-inch hole at d drilled through both pieces at once.
In one of the tall, weathered spires in the outcropping, some ten feet below its peak and four feet above the ground, was a round four-inch hole.
In the house-sized boulder directly beyond was a four-inch hole.
The above list will hopefully provide you with a few useful examples demonstrating the appropriate usage of "inch hole" in a variety of sentences. We hope that you will now be able to make sentences using this group of words.
