The strip circuit contains a flasher so that both lights are turned on and off at regular intervals.
In case the effect of a steady burning sign is wanted the flasher is omitted.
Behind these holes a moon box is placed, the lamps in it being on a flasheror controlled by "skeedoodle" sockets, thus giving the effect of an electric sign on a flasher.
A flasher sign can be imitated by cutting small round holes in the curtain to outline the reading matter on the sign.
If we are with Mr. Flasherat a quarter past, we shall just hit the best time.
This class of flasher is designed to operate signs whose lamps are arranged to give the effect of snakes chasing each other around the border.
It is on account of the care required in their construction, large amount of wiring necessary and large flasher required.
This simple flasher consists of a brass strip fixed at each end to a porcelain base and slightly arched upwards.
The secondary mechanism consists of a three cylinder flasher and is controlled by a master clock which transmits an electric impulse through a relay switch one each minute.
Dull's lightning type flasher for giving the appearance of a streak of lightning going across a display.
By means of the worm gear the large speed reduction necessary between the flasher shaft and motor is obtained without a multiplicity of gear wheels.
Simple on and off double pole flasher for "all on" or "all off" sign flashing.
This would require a flasher with 75 switches and about 82 wires to run between the sign and flasher.
The flasher is connected at P and R in series with the lamp it is to flash, and N adjusted so that it clears the plate about 1/32 inch when there is no current flowing in the winding.
A flasher of this type consists essentially of a revolving double pole switch with reducing gear and connection to a small motor for operating same.
It is to be noticed that this flasher is an automatic switch which is opened or closed according to temperature.
The flasher a acts as a switch to close the circuit for the whole.
Suppose now we should undertake to use the same flasher and the same lamp on a 220-volt current.
Illustration: The Assembled Parts Showing the Complete Flasher and Electric Connections with Adjusting Screw (Fig.
Illustration] Sunlight Flasherfor the Garden By Claude L.
This box should be of such design and construction that it will comply with the requirements of the electrical inspection department having jurisdiction over the locality where the flasher is to be used.
The four corner holes are for mounting the flasher in its containing case, and should be about 1/8 in.
Illustration: The Flasheras It Appears on the Stand and the Details of Its Construction] The supporting frame, of galvanized sheet iron or sheet copper, may be either circular or hexagonal in shape.
A metal box should now be provided to serve as a containing case and the flasher is complete.
The flasher should be connected in series with the lamp, the wires being fastened under the nuts on the bolts P and R, Fig.
How to Make an Electric Lamp Flasher Procure two pieces of metal, one of brass and the other of sheet iron, 5 in.
They are still seeking the missing Joe The Flasher Abadirro, also reputed to have boasted he would take over the numbers game.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "flasher" in a variety of sentences. We hope that you will now be able to make sentences using this word.
