The round files are formed by a swage similar to those used by common smiths, but a little conical.
This is too fragile to bear the action of the opposite steel dies of the swage above described.
In order to make the bolster of a given size, and to give it at the same time shape and neatness, it is introduced into a die, and a swage placed upon it; the swage has a few smart blows given it by the striker.
This die and swage are, by the workman, called prints.
Nor wanting power to mitigate and swage With solemn touches troubled thoughts.
Swage block, a perforated block of iron, having grooved sides and adapted for use in heading bolts and swaging objects of large size.
The first operation is to swage down one end, as at A in Fig.
In some cases, for small work, the upper swage is guided by the lower one: thus, in Fig.
The flange of the bottom swage is placed as in Fig.
For very small work, on which the hand hammer is sufficiently heavy to perform the swaging, a spring swage may be use: thus, in Fig.
Swage set consists of upsetting the point of the tooth with a swage, thus spreading it out equally on both sides of the body of the saw plate, as shown at A, Fig.
If the angle be made too acute for the thickness of the iron at the weld there is no alternative but to swage the flange down and thin it enough to bring the arms to a right angle.
Spring set is given either by bending, or by hammer blows, and swage set either by blows or by compression.
This capacitates one swage for different sizes of iron.
After each blow the work is revolved one-sixth of a revolution, and as the angles of the swage are true they obviously true the angles of the bolt head.
For large hand-made forgings theswage block, such as in Fig.
The fuller is essentially a spreading tool, while the swage may be termed essentially a shaping one.
We may check it to some extent, however, by employing a bottom swage block, as in Fig.
If the conditions are such that a swage must be used to perform forging rather than finishing, its seat should be [V]-shaped and not curved.
Nor wanting power to mitigate and swage With solemn touches troubled thoughts.
Caze Miss Eve watch de yerbs Mist'r Rattlesnake eat ter swage his pis'n, den she tell her chilluns ter eat de same kine ef he ev'r bite dem.
The sledge and swage are best used for this purpose.
The arm should be drawn out of a piece of flat iron and made half round by a swageon the anvil.
Take it out and weld it up in a bottom swage and reduce the weld to 1/2 in.
Emboss the centre by driving it in a hole in a swage block.
Place it all on a swage and round up with a top swage.
Place the swage on the metal and have the helper strike the swage.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "swage" in a variety of sentences. We hope that you will now be able to make sentences using this word.
