The wear between the slider and the raised slideways S is taken up by gibs and screws corresponding to those at a and c in the Fig.
Thus, when the cap is removed the side chocks, or gibs as they are sometimes called, can be lifted out by eye-bolts screwed into the holes at c; the weight of the shaft can then be sustained while the bottom piece D is removed.
The slide spindles D work in guides, and their cross heads C span the edges of the links, gibs being provided to take up the wear.
When guide bars are shaped thus |-- the cross head is provided with gibs (usually of brass composition) to take up the wear.
The shoes or gibs should not bear hard upon the guides, but be an easy sliding fit without lost motion.
Now end I is caused to rise or lower as follows:--The head D is adjusted by means of its gibs to be a sliding fit on the bar G in Fig.
As the strap, however, is only secured to the rod by the gib and key, and as these have a small amount of area on the sides, it is not unusual to employ two gibs and one key, as in Fig.
O represents the body of the slide, which is grooved at the sides to receive the gibs X, which secure it to the base P on which it slides.
If the strap is held by gibs and keys, as in the small end in Fig.
In some cases, the raised Vs are accompanied with gibs to secure the saddle; but in many instances the gibs are given too little wearing surface.
The depth of gibs and cutters for attaching the piston rod to the cross head, is 0.
What are the proper dimensions of the gibs and cutters of an engine?
Wal, our white men 'ranges de t'ing so dat dey counts our men ez dey goes up ter de box an' dey gibs out de tickets dereselves.
Fer a long time de relief gib me a quart ob milk a day, but now all I has ez w'at mah sistah Harriett gibs me.
I'se not able ter wuk now en all I has ez a small groc'ey order dat de relief gibs me.
I gibs no promise, an I'se gwine ter make my honey lam' happy spite hersef.
Heah's de 'terial wat gibs hope sometimes better'n preachin," and she whipped out the steak and prepared it for the broiler.
The gibs have holes countersunk for the screws to enter, to hold them approximately in place, and the nuts B are of brass, fitted into the filling pieces P that keep them from turning.
The legs are secured in position on the beam by means of the thumb screws A, which jam against the gibs C at the points of the screws.
If I finds dem an' gibs dem to yo' I'se to git five dollars?
It's a habit deygibs deirselves," said the unrelenting Lucy.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "gibs" in a variety of sentences. We hope that you will now be able to make sentences using this word.
