Then force the expander into the leaky flue, bringing the shoulder well up against the end of the flue.
To repair a leaky flue you should have a flue expander and a calking tool, with a light hammer.
Then turn the expander a quarter round, and drive in the pin again.
Loosen up and continue till you have turned the expander entirely around.
You should have a good pump, a good injector, a good heater, an extra steam gauge, an extra fusible plug ready to put in, a flue expander and a beader.
The roller expander is preferable to the Prosser in the hands of a novice.
The construction is such that when the hand is closed and the handles brought together the other end of the expander spreads out, an action just opposite to that of the conventional pliers.
At A the ring expander is shown spreading the ends of the rings sufficiently to insert the pieces of sheet metal between one of the rings and the piston.
After this is done you will force the expander into the flues driving it well up, in order to bring the shoulder of expander up snug against the head of the flue.
You should provide yourself with a flue expander and a calking tool, with a machinist's hammer, (not too heavy).
The pilot H enters a hole in the center of the lower die, and the expander G enters the centering jaws I, causing them to expand and center the gear C in the lower die.
On further advance of the piston rod E, the expander G is forced upward against the pressure of the springs J and the upper die F comes in contact with the upper surface of the gear.
Air is then turned into the cylinder D, and the piston rod E, the die carrier B, the top die F and the expander G descend.
We furnish a ten cable chest expander which is adjustable to give resistance up to 200 lbs.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "expander" in a variety of sentences. We hope that you will now be able to make sentences using this word.
