O then bespyed hir ain dear lord, As hee cam owr the lee; He sied his castle all in blaze Sa far as he could see.
The lady rade, True Thomas ran, Until they cam to a water wan; O it was night, and nae delight, And Thomas wade aboon the knee.
The bridecam tripping doun the stair, Wi the scales o red gowd on her hair.
She weend it had been hir luvely lord, As he cam ryding hame; It was the traitor Edom o' Gordon, Quha reckt nae sin nor shame.
Perthshire, when the government troops cam back to Edinbro'.
Could na say just preceesely; Sunday seldom cam aboon the pass of Bally-Brough.
The two brothers, Master Willemots, of Oxfordshere, cam to talk of my howse-hyring.
Nurse Anne Frank wold have drowned hirself in my well, but by divine Providence I cam to take her up befor she was overcome of the water.
Schort after the returnying of the Lord James, thair cam from the Quene of England, Sir Petir Mewtess,[693] with commissioun to requyre the ratificatioun of the Peace made at Leyth.
But in the jorney certane wordcam to hir that Johne Gordoun had brocken promesse in not re-entering in ward; for his father the Erie had promessed that he should enter agane within the Castell of Stryveling, and thair abyd the Quenis pleasur.
This hath bene the Lord James's action since the Franches cam their way.
The word cam to the Erle Bothwell and his, that the Hammyltonis war upoun the gaitt.
Practically every poppet valve, therefore, is lifted by means of a cam, which is a thick, irregularly-shaped piece of steel mounted on a shaft known as the cam shaft.
Inasmuch as the valve should remain closed throughout two-thirds or three-quarters of every two revolutions of the flywheel, the greater part of the periphery of the cam is circular, or at the same distance from the axis at all points.
A cam shaft should never be removed, however, without first marking the intermeshing teeth of its driving gear and those of its companions.
Such a cam shaft should never be dismounted without first marking intermeshing teeth of all spur and bevel gears that are concerned in its operation.
It will be seen that the force of the spring is communicated through the valve stem to the push rod, and thence to the periphery of the cam when the latter is in a position to lift the valve.
The cam shafts may be driven by a chain, the links of which fit over teeth cut on sprocket wheels, but there must always be a constant relation between the position of the cam shaft and that of the crank shaft.
As the opening of a valve located in the head is downward, however, the motion produced by the cam on the push rod must be reversed in direction.
There is thus one revolution of each cam shaft gear for every two of the crank shaft gear, and consequently each cam shaft is driven at the required half speed.
In other words, if the cam were a true circle with its axis passing through its center, there would be no motion of the valve, for all points of the periphery of a circle are at the same distance from the center.
The second night he kept watch on the Path Know, a hill which he supposed the howling o' the dog cam frae.
Motion is given to the spur wheel by a cam on the main shaft of the machine, which acts through a slotted lever and a connecting rod.
Should the machine have an inclination to creep forward when cranking, it indicates that the clutch lever screw which bears on the clutch lever cam has worn, and requires an extra turn to hold the clutch in neutral position.
In fitting the large time gear to the cam shaft it is important to see that the first cam points in a direction opposite to the zero mark (see Cut No.
As the valves are properly timed at the factory when the engine is built the necessity for retiming would occur only when such parts as the cam shaft, time gears or valves were removed in overhauling the engine.
A groove is cut in the cylindrical wall of the cam and an arm or lever is provided with a roller which rolls in the groove.
The cam is one of the most useful elements in modern machinery, for it provides a very simple means of producing the most complicated and irregular motions.
The cam in this case is a perfectly circular disk, but the shaft that turns it does not lie at the center of the disk, consequently an object bearing against the periphery must move toward and away from the center as the disk revolves.
As already stated, a lug on the under surface just in rear of the cam (f) engages with the front of the mainspring.
As the barrels, carrier and locks revolve the slope of the cam forces the locks forward and backward alternately.
And the domene cam to me with 3 soldiers with hym to entreate me to speake to the said generall, Jno.
The King of Firando sent me a buck, knowing the King of Crates camto supper, and gave me many thankes for his kind entertaynment yisterday.
Matias, Jacob Swager, cam to dyner to day; and Jno.
Our junk being ready to goe out, the Japon offecers cam and demanded to have 14 passingers to goe for Syam, although I had it under their handes to the contrary that they should carry non.
John Cam Hobhouse (W) polled 3,861, and was beaten by G.
Sure enow I cam all’d way ahint Lord Milton’s carriage.
Sir Francis Burdett and John Cam Hobhouse, jointly grasping a formidable weapon, are enlisted under the standard of “Parliamentary Reform.
Traxt Cam as a Free Trader had bid for the right to exploit Sargol when its sole exportable product was deemed to be perfume--a small, unimportant trade as far as the Companies were concerned.
But Cam had gotten to them somehow--or he would not have returned from his first trip with that pouch of Koros stones.
Yet Traxt Cam had brought back his bag of gems--somehow he had managed to secure them in trade.
And Cam had been well on the way to becoming one of the princes of Trade when he had been drawn into the vicious net of the Limbian pirates and finished off.
And, with Traxt Cam dead without an heir, they had seen their chance and moved in.
What had Traxt Camdiscovered which had given him the trading contract with these suspicious aliens?
Then Cam bought those rights--he made at least two trips in and out before he was blasted on Limbo.
The above list will hopefully give you a few useful examples demonstrating the appropriate usage of "cam" in a variety of sentences. We hope that you will now be able to make sentences using this word. Other words: askance; awry; cockeyed; engine; parts