After cooling, the cornets are transferred from the platinum cups directly to the pan of the balance.
After cooling, a solution of sodium acetate is added until the colour of the solution is no longer darkened.
The chloride of ammonium remains as a white mass which, after cooling in a desiccator, is weighed.
After cooling, a solution of ferrous sulphate is poured on its surface, so as to form a layer resting on it.
After cooling, the mixture is filtered, the residue well washed with alcohol and evaporated to a thin syrup in a porcelain dish over the water-bath.
This mordant is made with heat like the first; after cooling, some alum crystallizes, and it marks only 12-1/2 deg.
After cooling, a quantity of crystals of chlorate of potash is obtained, which are to be redissolved and crystallized again to purify them.
It is then annealed in a furnace, and, after cooling, is passed afresh through a rolling press.
After cooling, sulphuric acid diluted with its weight of water is added gradually, with brisk stirring, until a precipitate is no longer formed.
The mass becomes red in a few minutes, and, after cooling, it is treated with water, left to settle, and then decanted.
After cooling, the beaker is weighed, to ascertain the amount of liquid which is necessary in order to be able to apply later the above-mentioned correction.
The bead foams up upon the addition of the nitre, and the foam appears, after cooling, of a rose-red or violet color.
Borax and microcosmic salt dissolve glucina and its compounds to a colorless bead which, when overcharged with glucina, or heated with the intermittent flame appears, after cooling, turbid or milk-white.
Whether the heated substance is fused to a clear bead or not, and whether the bead remains transparent after cooling.
After cooling, the liquid is titrated with N/2 aqueous KOH solution, using phenol-phthalein as indicator, this figure giving the amount of the total fatty acids present.
After cooling in small frames, the soap is slabbed, and cut into blocks, and finally into portions suitable for stamping in a press (hand or steam driven) with a design or lettering on each side.
The above list will hopefully provide you with a few useful examples demonstrating the appropriate usage of "after cooling" in a variety of sentences. We hope that you will now be able to make sentences using this group of words.