Home
Idioms
Top 1000 Words
Top 5000 Words


Example sentences for "adjusting screw"

  • The aperture through which the platinum wire works must be so tight that acid cannot enter, yet it is desirable that the platinum wire should be capable of being projected more or less from the aperture by means of an adjusting screw.

  • The height or radius of the cutting tool and, consequently, the diameter of the turned ball, is regulated by adjusting screw A.

  • This gage may be a plain cylindrical piece of hardened steel, as at B, or it may have an adjusting screw as at C; for special work, different forms or shapes are also required.

  • It is also backed up by an adjusting screw in the plate s.

  • This attachment has an arm A on which is mounted a slide S that can be turned about a central pivot by adjusting screw D.

  • An adjusting screw, F, is provided for the grinder base to adjust the skate blade accurately.

  • J, attached by soldering and pivoted at K, with an adjusting screw, L, to set the tension.

  • To adjust the end fit of the live spindle a bracket K receives an adjusting screw L, whose coned end has a seat in the end J of the live spindle, M being a check nut to secure L in its adjusted position.

  • At 4 is an adjusting screw, which, by coming into contact with the carriage R causes it also to traverse, which it will do until it meets against a screw on the other side, marked 5, in Fig.

  • The upper end is threaded to receive an adjusting screw b, which is screwed in so that its end d meets the end c of the stud.

  • The end of the lower spring acts on an inclined plane, mounted in the frame w, which has an adjusting screw similar to v, to regulate the tension of the spring.

  • Transmission can now be shifted on its mounting base by means of adjusting screw, head of which protrudes through notch of frame fitting, located at rear of transmission (fig.

  • After moving transmission by means of adjusting screw, check front chain adjustment; then securely tighten the three transmission mounting stud nuts and again check chain adjustment, as tightening stud nuts sometimes changes chain adjustment.

  • When at rest, the upward tension of the spring, which carries the armature A, holds the platinum points in contact and causes the upper spring C, to leave shoulder of adjusting screw D, and rest against the heavy brass plate above it.

  • The point of adjusting screw A rests against a platinum point R soldered upon the vibrator.

  • At a point about midway between its ends, contact is made with the point of an adjusting screw, from which it springs away and returns in vibrating.


  • The above list will hopefully provide you with a few useful examples demonstrating the appropriate usage of "adjusting screw" in a variety of sentences. We hope that you will now be able to make sentences using this group of words.


    Some common collocations, pairs and triplets of words:
    adjusting screw; against his; but later; deep rose; done only; equal distance; find out; general introduction; half tablespoons; harm done; her chair; immediate knowledge; industrial workers; modern state; naval strength; other castes; personal relation; pure doctrine; sell their; sounding brass; thirty cents; would deliver